Name of the equipment: 3D OPTICAL PROFILOMETER Make & Model: ALICONA Model- Infinite Focus G5 I-Stem Registration ID- 3224898 Category of Instrument Characterization and Testing Types of Analysis / Testing Surface profile measurement Application: 1. Surface roughness measurement (2D and 3D) 2. Area measurement after corrosion 3. Thickness measurement 4. Tool nose measurement and wear measurement Description of Instrument Capable of performing non-contact 3D surface roughness, micro geometry, form measurements, etc. Also, this instrument can generate, capture and display point cloud of high density, registered true colour information.

Book through I-STEM: https://www.istem.gov.in/ Slot Booking Link I-STEM Slot Booking link for External User

Booking available for Internal and External Both Requisition form for Internals Externals

Faculty In-charge: Dr. Basil Kuriachen Email ID: bk@nitc.ac.in Phone number:  +91-9947187133

Technical Staff: Harikrishnan K (TE) harikrishnank@nitc.ac.in SHIBIN (ST) shibinr@nitc.ac.in SASI KK (TA) kksasi@nitc.ac.in

Department MED Office Email ID medoffice@nitc.ac.in Location FIST LAB, CAD/CAM CENTRE, Department of Mechanical Engineering Lab Phone No 0495 228 6476

Features of the equipment · High-Resolution 3D Surface Measurement · Non-Contact Measurement · Versatility in Sample Types · Form and Roughness Evaluation · Advanced Software Capabilities

Unique features/Measurement capabilities, if any Ø Focus Variation Technology Ø Automatic Stitching

Instrument Technical Description and Major Specifications (This Specifications Limited to Major 5) Travel range in XY  100 mm X 100 mm motorized  § Travel range in Z -100 mm motorized  § 6 Objectives   2.5X, 5X, 10X, 20X, 50X, 100X  < § Min measurable radii            1 μm § Finest lateral resolution  0.44 μm for 100x                                                   objective 3D rotation unit for capturing 3D data points

Measurement/Sample specifications: § Metallic/composite/alloys etc., § Maximum size usually limited 100mm x 100mmx100mm

· Quantity:  Maximum size usually limited 100mm x 100mmx100mm

· Sample Type: Metallic/composite/alloys etc.,

· Maximum No. of Samples Accepted at a Time- 2

· Minimum No of Days Required for Analysis – 1

Internal	External Academic Institutes	National R&D Lab	Industry
250/- per scan	500+ 18%GST Per scan	500+ 18%GST Per scan	500+ 18%GST Per scan